Pimentel, Catarina HelenaFreire Leira, María SoniaGómez Díaz, DiegoGonzález Álvarez, Julia2023-03-232023-03-232023Pimentel, C.H., Freire, M.S., Gómez-Díaz, D. et al. Removal of wood dyes from aqueous solutions by sorption on untreated pine (Pinus radiata) sawdust. Cellulose (2023). https://doi.org/10.1007/s10570-023-05145-40969-0239http://hdl.handle.net/10347/30383In this work, the possibility of using un-treated pine (Pinus radiata) sawdust as biosorbent for the removal of three wood dyes (blue, red and black) from aqueous solutions was investigated. The BET surface area of the material was 1.55 ± 0.81 m2 g−1 using N2 at − 196 °C and 17.83 ± 0.032 m2 g−1 using CO2 at 0 °C. The point of zero charge was 4.8. In addition, the material was characterized before and after adsorption by surface analytical techniques. Assays were performed to analize the stability of wood dyes with time and pH and also to estimate the pKa values. Batch adsorption experiments were performed and the influence of experimental parameters such as contact time (up to equilibrium), stirring rate (100 and 210 rpm), adsorbent dose (2–10 g L−1), pH (2–9) and initial dye concentration (5 and 300 mg L−1) were studied. The optimum conditions were pH 2 and adsorbent dose of 6 g L−1 and the highest adsorption percentages achieved at 5 mg L−1 were: 100.0% for the blue, 99.7% for the black and 92.4% for the red. For 300 mg L−1 adsorption efficiency decreased to 85.6, 57.0 and 63.8% for the blue, black and red ones, respectively. Kinetic data were best fitted to the pseudo-second order model, suggesting a chemisorption process. Freundlich and Dubidin-Radushkevich were the best isotherm models. Regeneration study showed that un-treated pine sawdust could be reused efficiently for red dye removal at least in up to four repeated adsorption–desorption cycles using NaOH as desorption agenteng©2023 The Author(s). This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/Atribución 4.0 Internacionalhttp://creativecommons.org/licenses/by/4.0/BiomassPine sawdustWood dyesBiosorptionWastewatersChemisorptionRemoval of wood dyes from aqueous solutions by sorption on untreated pine (Pinus radiata) sawdustjournal article10.1007/s10570-023-05145-41572-882Xopen access