Developing a novel technology for slurry management by project-based learning

dc.contributor.affiliationUniversidade de Santiago de Compostela. Departamento de Edafoloxía e Química Agrícola
dc.contributor.authorMoure Abelenda, Alejandro
dc.contributor.authorRoberts, Jenny
dc.date.accessioned2025-05-27T08:01:54Z
dc.date.available2025-05-27T08:01:54Z
dc.date.issued2024-02-01
dc.description.abstractFarming is responsible for 30% of global anthropogenic emissions. A novel technology, aligning with current regulations of covering slurry stores, has been developed for processing anaerobic digestate liquor, which is obtained from the screw press stage. Instead of using hazardous chemicals, such as sulfuric acid, to capture ammonia and greenhouse gases, the artifact contains calcium chloride as deliquescent salt. Preliminary simulations in Aspen Plus® v12 showed that the absorption of NH3 and carbon dioxide during the solid-liquid separation was feasible and the resulting clean brine could be used as chemical amendment of untreated slurry. The characterization of the performance of the artifact was organized following a project-based learning active teaching method, for a group of 3 students (17-year-olds) of secondary education, as part of the In2ScienceUK program. The collection of empirical data allowed the contents of the curriculum to be contextualized, enhancing environmental awareness of participants. A titrimetric method was employed to determine the content of NH3 and CO2 in the brine, and the granulation of the dewatered liquor with the fibers of anaerobic digestate was investigated by determining the compression strength required to break the pellets. The operation capacity of the prototype was found to be 250 m 3 of liquor per year, at a cost of £1/m 3 . The use of the filtered brine as chemical amendment also represented an additional 5.60 grams of ammoniacal nitrogen and 0.96 grams of inorganic carbon per cubic meter of unprocessed slurry. The concentrated liquor was a good binding agent that provided the pellets with a compressive strength of 207.00 ± 26.36 N, which was above the threshold value for commercialization purposes (50 N). The advances in the development of the prototype enhanced the suitability of the technology for industrial scale applications but hindered the adoption of subsequent editions of this pedagogic tool.
dc.description.peerreviewedSI
dc.description.sponsorshipThe author(s) declare financial support was received for the research, authorship, and/or publication of this article. This investigation received the support of the Engagement Fund of the Faculty of Science and Technology of Lancaster University and the Doctoral Prize of the Engineering and Physical Sciences Research Council (EPSRC) of the United Kingdom (Award ref. 1945857). The authors would like to acknowledge the support received by In2ScienceUK to partly organize this outreaching event and the participation of the students in the activities for developing the artifact and fostering a wider adoption rate by the stakeholders of the agroindustry.
dc.identifier.citationMoure Abelenda A and Roberts J (2024) Developing a novel technology for slurry management by project-based learning. Front. Sustain. Food Syst. 8:1321353. doi: 10.3389/fsufs.2024.1321353
dc.identifier.doi10.3389/fsufs.2024.1321353
dc.identifier.issn2571-581X
dc.identifier.urihttps://hdl.handle.net/10347/41839
dc.journal.titleFrontiers in Sustainable Food Systems
dc.language.isoeng
dc.publisherFrontiers Media
dc.relation.publisherversionhttps://doi.org/10.3389/fsufs.2024.1321353
dc.rights© 2024 Moure Abelenda and Roberts. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms. Attribution 4.0 International
dc.rights.accessRightsopen access
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/
dc.subjectAmmonia
dc.subjectGreenhouse gas emissions
dc.subjectMitigation technology
dc.subjectSolid-liquid separation
dc.subjectModified static chamber method
dc.subjectCircular economy
dc.subjectActive teaching-learning method
dc.subjectCurriculum content contextualization
dc.subject.classification31 Ciencias agrarias
dc.titleDeveloping a novel technology for slurry management by project-based learning
dc.typejournal article
dc.type.hasVersionVoR
dc.volume.number8
dspace.entity.typePublication
relation.isAuthorOfPublicationf53c6dc1-a4af-4d2f-abb3-d1332cd87571
relation.isAuthorOfPublication.latestForDiscoveryf53c6dc1-a4af-4d2f-abb3-d1332cd87571

Files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
2024_FSFS_Moure_Developing.pdf
Size:
2.36 MB
Format:
Adobe Portable Document Format