ZnO nanoparticles coated with oleic acid as additives for a polyalphaolefin lubricant

Abstract

In this work, ZnO nanoparticles (NPs) were successfully synthesized and coated with oleic acid (OA). The mean diameter of these NPs (ZnO-OA) was around 11.5 nm, their core was characterized by XRD and their coating by FTIR and Raman. Homogeneous dispersions at different concentrations (0.10, 0.25, 0.50, 0.75 and 1.00 wt%) of ZnO-OA in polyalphaolefin 40 (PAO40) oil were thermophysically and tribologically characterized. Both density and viscosity values increased with the concentration of NPs, reaching relative increments of 0.5% and 4.0%, respectively, for the 1 wt% nanodispersion. Tribological tests were performed at 353.15 K using an Anton Paar MCR 302 rheometer equipped with a tribological ball-on three-pins configuration testing module. Regarding the tribological behavior, the optimal concentration was 0.25 wt% of ZnO-OA (25% of reduction in the friction coefficient and 82% wear reduction in terms of cross sectional area, respect to those obtained with the neat base oil). The rolling mechanism owing to the spherical shape of the nanoadditives, transforming sliding friction into rolling friction, and the mending effect could explain the better tribological performance of nanolubricants with respect to that of neat PAO40. In addition, the presence of PAO40, ZnO-OA NPs and iron oxides was evidenced from confocal Raman microscopy on the worn surfaces obtained from tribological test with PAO40 + 0.25 wt% ZnO-OA dispersion